Friday, September 4, 2020

Tasteful Touches and the In Good Taste Suite "Hello" card!

Welcome to my blog!  Today's card is made using products from the In Good Taste Suite by Stampin Up!®.  The nice thing about these suites is that you can buy it all at once or just the bits and pieces that you like from each suite.  I find that I do combine elements from other suites at times.  Like this card I brought in the ribbon pack from the Flowers for Every Season suite.  Some elements help to add texture to cards like the In Good Taste wooden elements from this suite.  You can also add texture by using Stampin Dimensionals.  Have fun and experiment with textures when your creating your cards.  You'll surprise yourself when you see your end project!  Hope you enjoy this card.

Here's a video link with this card and 2 others using this suite!

https://www.facebook.com/StampinJulieBrown/videos/3154089274651111



I'm also including written instructions.

Project Instructions:

Cuts and Card Base.  DSP = Designer Series Paper

Card Base - Thick Whisper White - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - In Good Taste DSP - 4 x 5 1/4 cut into 2 pieces (One 2 1/4 x 4 and One 3 x 4)

Layer 2 - Night of Navy - (2) 1 x 3

Layer 3 - Whisper White - 1/2 x 4

Layer 4 - In Good Taste Wood Element

Layer 5 - Whisper White - 4 x 5 1/4

Layer 6 - Night of Navy - 4 x 5 1/4

Layer 7 - Whisper White - 3 3/4 x 5

1.  Layer 1 - Adhere one of the Night of Navy strips (Layer 2) to the  the 3 x 4 sheet (Slate)  about 1/2" from left edge and flush with the top.

Then wrap ribbon around the top and hang down to about 1/2' from bottom edge of Night of Navy strip.

Adhere the 3 x 4 sheet (Slate) on the top of the card leaving space at the top and side edges.

Then adhere the 2 1/4 x 4 sheet (Brick) right below the top one again leaving space at the bottom and side edges.

Adhere the other Night of Navy strip to the Brick sheet on the right side centering top and bottom and flush to the right edge.

2.  Layer 3 - Stamp the flourish image in Night of Navy Ink onto this strip then adhere to the card front layering over the top and bottom sheets covering where they meet.

3.  Layer 4 - Using a sponge dauber and the Night of Navy ink daub color onto the wood element.

Then adhere to the card front about 3/4" from left side onto the (Brick) DSP.  It should layer onto the Night of Navy strip as well.

4.  Layer 5 - Stamp the large flower in Night of Navy ink then leaving enough space to cut out with one of the label dies stamp the sentiment in Night of Navy as well.

Cut out sentiment with one of the Label dies.  Then fussy cut the flower.

Adhere the Label to the card front on the top section centering top and bottom and overlapping the ribbon and Night of Navy strips.

Color three large rhinestones with the Dark Night of Navy stampin blend then adhere to the label as shown.

Adhere the flower with Stampin Dimensionals overlapping the Wood Element and Night of Navy strip as shown.

5.  Layer 6 - Adhere to the inside of the card.

6. Layer 7 - Stamp the flourish image in the lower right hand corner in Night of Navy ink.  Then stamp the sentiment in Night of Navy in the center of the sheet.

Adhere to the inside of the card .

Don't forget to get all the supplies you need to recreate these cards.

Product List





Thursday, September 3, 2020

Tasteful Touches - Textured Embossing "Birthday"

One of my favorite tools is the embossing folders by Stampin Up!®.  The In Good Taste Suite has most of what you need to complete this card.  Just add ink, card stock, rhinestones, ribbon, Peaceful Moments Stamp set and you've got the whole package.  This card combines Stampin Up's® subtles and neutrals color families and I'm very pleased with the outcome.  It's pretty simple to put together which is another great plus for this card!

Click below to see the video with this card and two others.

https://www.facebook.com/StampinJulieBrown/videos/3154089274651111

Below is the written instructions as well.

Project Instructions:

Cuts and Card Base.  DSP = Designer Series Paper

Card Base - Early Espresso - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - Petal Pink - 4 x 5 1/4
Layer 2 - In Good Taste DSP - 1 1/2 x 4 1/2
Layer 3 - Very Vanilla - 4 x 5 1/4
Layer 4 - Very Vanilla - 2 x 4
Layer 5 - 4 x 5 1/4

1.  Layer 1 - Run through the Tasteful Textile Embossing Folder.

2.  Layer 2 - Adhere to Layer 1 flush with the top edge and about 3/8" from side edges.

Wrap ribbon around both Layer 1 and Layer 2.

3.  Layer 3 - Stamp Leaf image from the Tasteful Touches Stamp set 4 times.  Twice in Petal Pink and twice in Crumb cake.  Then fussy cut them out.

Adhere them to the card front as shown.

4.  Layer 4 - Stamp the sentiment in Early Espresso ink then cut out with one of the label dies from the Tasteful Labels Dies.

Adhere to the card front with Stampin Dimensionals layering over the leaves as shown.

Color three small rhinestones with the Bronze stampin blend and add to the sentiment label.

Layer 5 - Stamp the leaf in the bottom right hand corner in Petal Pink ink.

Stamp the sentiment from the Peaceful Moments stamp set in Early Espresso Ink on center of the sheet.

Adhere to the inside of the card.


Don't forget to leave me a comment below!

To purchase supplies just click on the pictures below!

Product List





Wednesday, September 2, 2020

Tasteful Touches Simple Stamping

I'm always pleased with how well these simple stamping cards come out!  I will admit I can get caught up in owning all the gadgets and forget how beautiful a card can be with just a stamp set, card stock, and ink.  For this card I used the Tasteful Touches and Peaceful Moments stamp sets by Stampin UP®.  Combine it with Night of Navy and Very Vanilla card stock, ink and look at the end result!

Below is a video link for this card and 2 others that I did with the Tasteful Touches Bundle and Suite.

https://www.facebook.com/StampinJulieBrown/videos/3154089274651111



I'm also including written instructions:

Project Instructions:

Card Base and cuts -

Card Base - Night of Navy - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - Very Vanilla - 4 x 5 1/4
Layer 2 - Very Vanilla - 4 x 5 1/4

1.  Layer 1 - Stamp the sentiment from the Tasteful Touches stamp set in Basic Gray about 1/2" from bottom edge centering on sheet.

Then starting at the left stamp the first feather in Smokey Slate, next in Crumb Cake, next in Night of Navy, next in Crumb Cake and last in Smokey Slate.  (as shown)

Adhere to the front of the card base.

Layer 2 - Stamp a feather onto the center of the sheet in Smokey Slate.

Then stamp the "Thank you" sentiment from the Peaceful Moments stamp set in Black Memento ink over the top of the feather.

Adhere to the inside of the card.


I really like the way this card came out!  I hope you will try this one out!  Think about changing up the colors.  Thanks for visiting my blog today.  Please leave me a comment and let me know your thoughts on this card!

Don't forget to get the supplies you need to create this card.  Just click on the photos below!

Product List


Tuesday, September 1, 2020

Hand-Drawn Blooms Water Color "Birthday Card"

This card could be considered a simple stamping card even though I used the Water color pencils and Water Painters by Stampin Up!®  I used the Hand-Drawn Blooms and the Bloom & Grow stamp sets for this card.  It's a simple card to do but the final product looks great.  I've had fun creating cards with this stamp set and the bundle as well.  Watch for the cards I designed using the dies.  I used the masking technique again for the sentiments.  I hope you enjoy this card.  Don't forget to leave me a comment below and let me know what you think!  I'd love to hear from you!

Click on the link below to go to the video I did for this card and 2 other simple stamping cards!

https://www.facebook.com/StampinJulieBrown/videos/2689866074589827


I've also included written instructions below:


PROJECT INSTRUCTIONS

Cuts and Card Base.

Card Base - Balmy Blue - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - Whisper White - 4 x 5 1/4

Layer 2 - Whisper White - 4 x 5 1/4

Layer 1 - Stamp the Flower image from "Hand-Drawn Blooms" in Staz on ink in the center of sheet.

Color in flowers and stems with Water Color pencils (I used Balmy Blue, Granny Apple Green and Flirty Flamingo from the Watercolor pencils assortment 2)

Then use the water painters to blend in what you just colored.

Stamp the sentiments on each side as shown.  You will need to use the masking technique (see video) using Balmy Blue ink.

Adhere to the front of the card.

Layer 2 - Stamp the sentiment from the "Bloom and Grow" stamp set in Balmy Blue as shown.

Stamp the small flowers from the Hand-Drawn Blooms stamp set as shown.  Then color in with the flirty flamingo watercolor pencil and blend with water painter.

Adhere to the inside of the card.


Thank you for taking the time to stop by my blog!  Creating makes me happy and I love to share what I do!

If you need any supplies to create this card, just click on any of the pictures below:

Product List