Tuesday, January 26, 2021

Forever & Always by Stampin Up® "Love You"

Welcome to my blog!  I think I am going through a Purple madness stage as I have been doing several purple cards as of late!  I have several of my friends that love purple and always get excited when I do a card class and the cards are purple!  

For this card I used the Forever & Always Stamp set, Always Dies, Love You Always Designer Series Paper,  True Love Designer Series Paper and the Matte Black Dots which are all part of the unbelievable Love you Always Suite by Stampin Up®.

If you'd like to be notified when I post a new card just add your email to the right where it says "Follow Me"

Here are the instructions:

Cuts and Card Base - DSP = Designer Series Paper

Card Base - Highland Heather - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - Love You Always DSP - 3 x 5 1/2

Layer 2 - White - 1 3/4 x 5 1/2

Layer 3 - True Love DSP - 3/4 x 5 1/2

Layer 4 - Basic Black - 1 1/2 x 3

Layer 5 - Highland Heather - 1 1/2 x 2 1/2

Layer 6 - White - 4 x 5 1/4

Instructions:

  1. Layer 1 - Adhere to the card front about 5/8" from top edge keeping right and left edges flush.
  2. Layer 2 - Color ribbon with the Highland Heather Stampin Blend then wrap it around left side of this layer about 1/4" from edge.  Adhere to Layer 1 about 3/8" from top edge. 
  3. Layer 3 - Using the Highland Heather Stampin Blends color in the flowers then color in the center of the flowers with the Soft Sea Foam Stampin Blends.  Adhere to the bottom of Layer 2 flush. 
  4. Layer 4 -  Apply Adhesive strips to back then using the Always Dies "Love" cut out the work love.  Tear off back of Adhesive strips and Apply to Layer 2 just to the right of the ribbon. 
  5. Layer 5 - Using the Always Dies cut out several of the small flowers.  Then adhere the flowers to Layer 2 as shown (Note: some may hang off the edge, just trim them once you get all the flowers in place). 
  6. Once the flowers are in place then stamp the "You" sentiment as shown. 
  7. Adhere the Matte Black Dots.  Three large to the ribbon, small ones in the center of the flowers. 
  8. Layer 6 - Using Black Memento ink stamp the large flower in the lower right hand corner then color in the leaves of the flower with Highland Heather Stampin Blends and the centers with Soft Sea Foam Stampin Blends. 
  9. Stamp the sentiment in the center as shown.  Then adhere to the inside of the card. 

Please don't forget to leave me a comment below.  I'd love to hear from you!  Happy Stamping!

Supply List:  (If you need any supplies just click on any of the pictures below to purchase)
Product List




 

Monday, January 25, 2021

Always in my Heart by Stampin Up® "Anniversary Card"

Hello!  Thanks for stopping by today!  I wanted to create an Anniversary card that would work for a Man or Woman so I used some of brown tone card stock.  I know there is a lot of pink but I think that this is a card that both spouses would like!  

For this card I used the Always in My Heart Stamp Set, Floral Heart Dies, Love You Always Foil Sheets, Rhinestone Basic Jewels and a 2 1/4 circle punch all by Stampin Up®

So here we go:

Cuts and Card Base - DSP = Designer Series Paper

Card Base - Soft Suede - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - Love You Always DSP - 4 x 5 1/4

Layer 2 - Coastal Cabana - 4 1/4 x 4 1/2

Layer 3 - Crumb Cake - 3 x 3

Layer 4 - Rococo Rose - 1 1/4 x 5 3/4

Layer 5 - Coastal Cabana - 4 1/8 x 5 3/8

Layer 6 - Very Vanilla - 4 x 5 1/4

Layer 7 - Love You Always DSP - 1/2 x 5 1/4 

Instructions:

  1. Layer 1 - Using the 2 1/4" circle punch, punch out 2 circles. Adhere to the card front one in the upper right corner and one in the lower left corner (Note: they will hang off, this is what you want then you can trim the parts that overhang) 
  2. Layer 2 - Using the Floral Heart Dies cut out the large detailed heart!  Adhere to card front centering as shown. 
  3. Layer 3 - Using the same die, use it to cut out just the heart.  Adhere the heart to the center of Layer 2. 
  4. Layer 4 - Using Black Memento Ink stamp the sentiment in the center.  Then using the banner die out of the Floral Heart Dies cut out the banner. Using Stampin Dimensionals adhere to the card front as shown. 
  5. -  Color in 5 Rhinestones with the Dark Bermuda Bay stampin blend. Then adhere to the card front as desired.
  6. Layer 5 - Adhere to the inside of the card.
  7. Layer 6 - Stamp sentiment in Black Memento Ink as shown.
  8. Layer 7 - Adhere to the bottom edge of Layer 6.  Then adhere them both to Layer 5 on the inside of the card. 

I'd love to hear from you so please leave me a comment below and let me know what you think!

Supply List: If you need to order just click on the pictures!
Product List









 

Sunday, January 24, 2021

Art Gallery "Happy Birthday"

Welcome!  One of my favorite colors from Stampin UP® is Merry Merlot.  I think it gets overlooked a lot but it is such a beautiful color so I was glad to see Stampin Up® come out with a Designer Series Paper in the Jan-June 2021 Mini catalog that coordinates with Merry Merlot!  

Todays card I created while designing with the Fine Art Floral suite!  This suite has so many fun products.  One of the coolest is the Gilded Leafing Embellishment.  Watch the video below to watch as I made this card (spoiler alert - I made a ton of mistakes in the video while working with this so please watch with patient. LOL).  I am also including step by step instructions below!

https://www.facebook.com/StampinJulieBrown/videos/420593482517720


Cut and Card Base - DSP = Designer Series Paper

Card Base - Merry Merlot - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - White - 2 1/4 x 4 1/4

Layer 2 - Fine Art Floral DSP - (2) 1 x 4 1/4

Layer 3 - White - 4 x 5 1/4

Layer 4 - White - 4 x 5 1/4

Instructions:

  1. Layer 1 - Using Mossy Meadow ink stamp the sentiment about an inch from the bottom edge. Wrap ribbon around just below the sentiment.  Then adhere to the card front about 1 1/2" from right edge (this should center it) 
  2. Layer 2 - Adhere one to the left side of Layer 1 and one to the right side of Layer 1 keeping edges flush. 
  3. Layer 3 - Using Merry Merlot Ink stamp the flower image with three flowers then using Flirty Flaming do it again.  
  4.   - Next using the small detailed flower stamp, stamp the image over one of the leaves in each bundle.  Then cover with the Heat and Seal powder.  Dump off any excess powder.
  5.  -  Heat up with Heat Tool Note: Very Important to not overheat or it will loose it stickiness about 3 seconds works great! 
  6.  -  Now grab a piece of the Gilded Leafing Embellishment and lay over the heat and stick.  Press it down and when you fill like it has stuck good.  Use a soft brush to brush off the remaining Gilded Leafing. (Which you can put back into your container) 
  7.  -  Using the Floral Gallery Dies cut out both images then adhere them to the card front onto Layer 1.  I laid down the Flirty Flamingo one on the right side first then overlapped the Merry Merlot as shown. 
  8. -  Tie a bow with the ribbon and using a mini glue dot adhere it to both stems as shown. 
  9. Layer 4 - Stamp flower image in lower right hand corner in Flirty Flamingo ink.  Then using the Approaching Perfection stamp set (this is a Sale A Bration item) stamp sentiment in Mossy Meadow ink in the center.  
  10.  - Adhere to the inside of the card!

Here's a look at a card  I did with a different Design from the Fine Art Floral Designer Series Paper!


Hope you like the cards and will try it out!  Your going to love the Gilded Leafing!

Here's the supply list that I used:  Remember if you need any of the items just click on the photo to purchase!
Product List











 
 

Saturday, January 23, 2021

Hydrangea Haven Quick and Easy Thank you Card

Welcome to my blog!  Hope your day is going well!  I needed a quick and easy Thank you card today so I decided to to a simple stamping card using the Hydrangea Haven stamp set by Stampin UP®.  Purple is one of my favorite colors so I love this set with all the beautiful Hydrangea Hill Designer Series Paper!  It's an explosion of purple! I did try to soften it a bit by using a Misty Moonlight card base and I think it looks great together!  

Let's get started!  You will find the instructions below:

Cut and Card Base - DSP = Designer Series Paper

Card Base - Misty Moonlight - 5 1/2 x 8 1/2 scored at 4 1/4

Layer 1 - Hydrangea Hill DSP - 3 x 5 1/2

Layer 2 - Hydrangea Hill Mercury Glass - 3 1/4 x 4 

Layer 3 - White - 3 x 3 1/4

Layer 4 - Scrap of Gorgeous Grape

Layer 5 - White - 4 x 5 1/4

Instructions:

  1. Layer 1 - Wrap Ribbon around layer about 1/2" from left edge.  **** Do not use any adhesive on the front as you will need to place other layers under the ribbon. Adhere to the card front on the left side keeping all edges flush.
  2. Layer 2 - Using the Detailed Trio Punch round the top right corner.  Then adhere to the card front 1/2" from right side and 3/4" front top edge. Placing a section under the ribbon as shown.
  3. Layer 3 - Stamp the Hydrangea and stem images in Black Memento ink.  Then using the solid stamp images stamp the Hydrangea in Gorgeous Grape ink and the stem and leaves in Mint Macaron ink. 
  4. Using the Detailed Trio Punch round the top right corner.  Then adhere to Layer 2 on the card front. Again you will be placing part of it under the ribbon. 
  5. Layer 4 - Using the Hydrangea Dies cut out the small label die.  Then using White Craft ink stamp the sentiment onto the label. Using a mini glue dot adhere the label to the bottom of the ribbon about 1 12/" from bottom edge.  Tie a bow with the ribbon and using Mini glue dots adhere it overlapping edge of the label. 
  6. Adhere three of the Pastel Peral in Highland Heather to Layer 3 as shown.
  7. Layer 5 - In the lower right hand corner stamp the Hydrangea in Black Memento Ink.  Then using the solid stamp image stamp over in Gorgeous Grape ink. Stamp the sentiment in Black Memento Ink.  Then adhere to the inside of the card!

What a fun set!  Isn't the little label so cute!  I hope this card will inspire you to get busy making some cards! Please take the time to leave me a comment below!  I'd love to hear from you!

Product List
Supply List:  (To order just click on the picture)