Julie's Creative Stamping: Same Design Different Card

Today I have an exciting take on the Same Design Different Card. I did an accordion fold card using different Designer Series Paper and Stamp Sets! I love the way they both came out! Look what a difference these two suites make! Parisian Blossoms Suite with Strong & Beautiful stamp set and Birthday Bonanza Suite!

For the first Card I wanted to do a special Mother's day card for my Mother. I used Stampin Up!® stamp set Strong & Beautiful, Forever Blossoms along with the Parisian Blossoms Designer Series Paper and the Parisian and Cherry Blossom Dies. This one came out beautiful! The Strong and Beautiful stamp set allowed me to express my gratitude for all my Mother has done for me over the years!

Here are the instructions for the Card Base, Card stock and Designer Paper cuts:

Card Base:
Mother's Day Card Happy Birthday Card
Pool Party - 5 1/2 x 12 scored at 4, 7 1/2, 11 Smokey Slate - 5 1/2 x 12 scored at 4, 7 1/2, 11
- 5 1/2 x 11 scored at 3, 6, 8 1/2 - 5 1/2 x 11 scored at 3, 6, 8 1/2
Panels: Panels:
Front Panel & Panel 1 Front Panel & Panel 1
(2) Cherry Cobbler 2 3/8 x 5 3/8 (2) Basic Black 2 3/8 x 5 3/8
(2) Parisian Blossoms DSP 2 1/4 x 5 1/4 (2) Birthday Bonanza DSP 2 1/4 x 5 1/4

Panels 2 & 3 Panels 2 x 3
(2) Cherry Cobbler 2 7/8 x 5 3/8 (2) Basic Black 2 7/8 x 5 3/8
(2) Parisian Blossoms DSP 2 3/4 x 5 3/4 (2) Birthday Bonanza DSP 2 3/4 x 5 3/4

Panels 4 & 5 Panels 4 & 5
(2) Cherry Cobbler 3 3/8 x 5 3/8 (2) Basic Black 3 3/8 x 5 3/8
(2) Parisian Blossoms DSP 3 1/4 x 5 1/4 (2) Birthday Bonanza DSP 3 1/4 x 5 1/4

Panel 6 and Back Panel 6 & Back
(2) Cherry Cobbler 3 7/8 x 5 3/8 (2) Basic Black 3 7/8 x 5 3/8
(2) Parisian Blossoms DSP 3 3/4 x 5 1/4 (2) Birthday Bonanza DSP 3 3/4 x 5 1/4

Card base instructions: After scoring the 2 card bases, on the 5 1/2 x 12 fold the 4" section in a valley fold then fold the rest going back and forth between valley and mountain. On the 5 1/2 x 11 fold the 3" end in a mountain fold then fold the rest going back and forth between mountain and valley. Make sure to burnish the edges so that it will fold easily. Adhere these 2 pieces together by applying tear and tape to the 1" fold section then laying the 3" end from the 5 1/2 x 11 piece onto the 1" folded section. This picture if from the back of the card.

Front Panel - Mother's day card

The first thing you will do is using Tear and Tape adhere the ribbon to the Card front panel making sure to leave enough room on the left side so that the ribbon will wrap around entire card once it is folded and tie as shown.
I stamped the sentiment in Black Memento ink onto Whisper White then cut it out with the Stitched Shapes Dies. I also cut out another circle in Petal Pink. Then adhere both to the card front.

Panel 1 & 2
1 - After adhering the Card stock and DSP to the panel. I stamped some flowers and leaves on a Whisper White scrap using the Forever Blossoms stamp set then colored them in with Cherry Cobbler, Petal Pink and Mint Macaron Stampin Blends® then cut them out with the Cherry Blossoms Dies. Then adhered them to the center of the panel.

2- Adhere the Card stock and DSP to panel 2 then using the Strong & Beautiful Stamp Set and the Forever Blossoms stamps set stamp the sentiments and flower and leaves in Black Memento ink onto a Whisper White piece. Cut out the sentiments with the Oval Die from the Stitched shapes Dies and the flower and leaves using the Cherry Blossoms Dies. Also cut out 2 Petal Pink ovals (one size bigger) from the Stitched Shapes dies. Then adhere all to the panel as shown.

Panel 3 & 4

3 - Adhere the card stock and DSP to the panel.

4 - On a piece of Whisper White stamp the sentiment using the Strong & Beautiful stamp set in Black Memento Ink then cut out with the Oval Stitched Shape dies. Also cut out another Stitched Oval (one size bigger) with in Pretty Pink card stock.
Cut out 3 of the flourishes in Cherry Cobbler using the Parisian Dies. (One of these you will use on panel 6)
Then add all but one of the flourishes to the panel as shown.

Panels 5 & 6

5 - Adhere the Card stock and DSP to panel

6- Stamp the sentiment using the Strong & Beautiful stamp set in Black Memento Ink using a scrap of Whisper White then cut out using the Stitched Rectangle Dies. Cut out another rectangle die (next size bigger) in Pretty Pink. Then add to panel using the flourish you cut on Panel 4 as shown.

Back Panel:

Adhere the card stock and DSP to the back panel.

Close card and tie ribbon!

The second card was created using products from the Birthday Bonanza Suite!®. This card came out so cute and I can't wait to send it off to my Grandson. What a fun card it will be for him to open. Bright colors and fun images!

Here are the step by step instructions for this fun filled card:

First you will want to stamp the following onto Whisper White card stock:

Three candles one in each of the following colors - Daffodil Delight, Terracotta Tile and Bermuda Bay.
One toucan in Black Memento ink then color in the beak with Mango Melody, Daffodil Delight and Cajun Craze Stampin blends.
One Lion, body and head in Daffodil Delight, the Mane in Mango Melody and face in Black Memento ink.
One koala in Smokey Slate and face in Black Memento ink.
2 set of the balloons in Daffodil Delight, Terracotta Tile and Bermuda Bay and 2 of the balloon strings in Black Memento Ink.
2 hats in Bermuda Bay.
A line of presents in three different colors, Daffodil Delight, Terracotta Tile and Bermuda Bay.
Cut out all images that have dies with the Bonanza Dies. All other images will need to be fussy cut.

Card Front:

The first thing you will do is using Tear and Tape adhere the ribbon to the Card front panel making sure to leave enough room on the left side so that the ribbon will wrap around entire card once it is folded and tie as shown.

Stamp sentiment onto a piece of Whisper White in Black Memento Ink. Then cut out using the Layering Oval Dies making sure the sentiment is towards the bottom of the Oval. Also cut out an oval scallop from Basic Black card stock and mat the Whisper White oval onto the Black Oval. Adhere both to the card front as shown. Then add candles as shown. (If you haven't fussy cut them out do so now)

Panel 1 and 2

1 - Adhere the card stock and DSP (Designer Series Paper) to the panel.

2 - Adhere the card stock and DSP to the panel. Then on a piece of Whisper White stamp the sentiment and fussy cut around. Adhere to the top of the panel as shown. Then add the Toucan, Balloons, Balloons strings and hat as shown.

Panel 3 and 4

3 - Adhere the card stock and DSP to the panel.

4 - On a piece of Whisper White stamp the sentiment then using the Layering Circle Dies cut the sentiment out. Then cut out a scallop circle in Terracotta Tile. Mat the sentiment circle onto the Terracotta Tile. Build the Lion then attach to the back of the circle as shown then add it all to the panel as shown. If you haven't already cut out the presents then go ahead and fussy cut them out and adhere to the bottom of the panel.

Panels 5 and 6

5 - Adhere the Card stock and DSP to the panel.

6 - Using the Bonanza Dies cut out the tag then stamp the word "from" as shown. Using Glue dots attache the ribbon to the top of the tag. Then adhere the tag to the panel as shown. Next add the Koala, hat and balloons as shown.

Back Panel:

Add the card stock and DSP (Designer Series Paper) to the back panel.

Tie ribbon around card to close it.

I hope you will try out this design. It was a blast to put together and you can see that by just changing up the Paper and Stamp sets it makes a big difference on the outcome! Don't be afraid to try out your favorite product of suites to create your own version of these cards!

Don't forget to comment below to let me know what you think of these cards.

Here's a link to a facebook live video that I did on making the Birthday Bonanza Card.

https://www.facebook.com/StampinJulieBrown/videos/1749400568534912/?modal=admin_todo_tour

Click on the pictures below to order any products that you may need to complete these cards!

tams# 43963

Product List